Welcome to Patiodrape.com

The do it yourself outdoor drapery store.

We manufacture custom outdoor patio drapes.

Our drapes are durable, flame resistant, and custom built to your specific dimensions. Our patio drapes look great while providing sun, wind, and water protection. Our mesh technology breathes and allows you to see through the drapery.  

Patio Drape is now available for online for Do-It-Yourself (DIY) curtain installations.  

Our solutions provide our customers the ability to extend the outdoor use of their patios through the hot summer months as well as the wet fall and winter months.  Patio furniture also benefits greatly with protection from the sun and rain. 

How it works

Patio Drape is customized to fit the specific dimensions of your Do-It-Yourself project.  There are three recommended installation methods:  

Track & Trolley

roller system

Steel Rod with strait ends

straight ending

Steel Rod with ball ends

ball rod

 

Track & Trolley is your best solution for projects requiring wide openings.  Track is shipped in 8 foot lengths and is installed end to end.  If you require 12 feet overall width, we recommend you order two 6 foot track lengths.  If your overall curtain opening is 24 feet, you would order three 8 foot lengths.  

The galvanized steel track uses pocket rollers, or trolleys, with built in bumpers to minimize jamming.  For each foot of Patio Drape material, you require one trolley.  For each panel of Patio Drape you require one extra trolley.  

Sample Project:  

Assume overall width of opening is 15 feet.  Total height of floor to ceiling is 96 inches.  

  • ·For each linear foot of coverage add one inch to the order.  Most drapes are center pull, therefore you need two panels of material at least 7’6” wide.  
  • ·For vertical measurements, subtract two inches for the track height, space between material and track as well as clearance for the bottom of drape.  

Sample Order:  

Two panels of material (15 feet cut in half for two panels).  Add no inches for flat drape install or add 15 inches for pleats.  

Dimensions for one pleated panel would therefore be 7’6”.  Plus 8 inches or more for pleats.  

  • ·One panel of Patio Drape material would be ordered as 8 feet 2 inches wide by 94 inches high.  Two panels required.  
  • ·Three tracks at 5 feet each or one 8 footer plus one 7 seven footer.  
  • ·Trolleys would be one for each foot of material plus one for each panel for a total of 18 trolleys.

Contact Us

Phone: (916) 742-5094
email: This email address is being protected from spambots. You need JavaScript enabled to view it.

We encourage you to contact us via phone, email, or the form below. For directions to the office, please click here. If you have any questions or comments, please feel free to get in touch. We're always happy to hear from you!


captcha